Setup MS Outlook 2013 with SSL Support

Setup MS Outlook 2013 with SSL Support

Below is the list of ports for accessing email on your local client:

Incoming mailserver : <server hostname or domain name>                                
Outgoing mailserver : <server hostname of domain name>                
POP3: 110 default (995 for SSL)                                    
IMAP: 143 default (993 for SSL)
SMTP: 25 default (587 for TLS) and (465 for SSL)
Note: To prevent SSL certificates error while using SSL mode, please use the server hostname and NOT the domain name in your email server settings (incoming and outgoing server name)

Open Outlook and click on Add Account button then click on radio button named Manual setup or additional server types

2. After that select radio button POP or IMAP and click on Next button. 

3. Then put the information as described below. 

A . Display Name (displayed to other people)

B . Email address (Your mail address ex: [email protected])

C. Put server host name where your mail service is hosted (You can find it in mail,  we have send to you at time of hosting or by run some command on CMD first run ping mail.domain name then copy the IP address and run command nslookup Ip address as  shown below). 

Example:

Ping mail.diadem.co.in
nslookup 103.253.125.85 
You get the server host name zimbra.diademtech.in

D. The outgoing mail server is same as incoming mail server. 

E. Your full mail address ([email protected])

F. Put the password you have set at the time of mail-id creation and click on MoreSettings.  

4. In more settings go to the Outgoing server tab and make a tick on the check box named My outgoing server (SMTP)requires authentication. 

5. In Advanced tab tick on check box named this server requires an encrypted connection for incoming server (pop3)and change outgoing server port to 465 and set encryption type to SSL. Then set leave a copy option accordingly and click on OK button.

 All set now you can use an encrypted connection for sending and receiving mails. 

 To setup Outlook 2013 without SSL support refer to the following KB: https://kb.diadem.in/pop-and-imap-email-account-configuration-on-outlook-2013_722.html
 



Article ID: 915
Last updated: 14 Sep, 2019
Revision: 15
Email Hosting -> MS Outlook -> Setup MS Outlook 2013 with SSL Support
https://kb.diadem.in/setup-ms-outlook-2013-with-ssl-support_915.html